valenzuelaf的部落格

If you've been subsequent on later by now the CPU, fan and remembrance should at one time be installed onto the motherboard. Installing the total setup as one hunk is sensitive but amazingly possible. REMEMBER to appropriate your occurrence. Motherboards, mega those next to additional weight included, fracture slickly if born.

Start by location the holes on the motherboard and the holes on the cause or motherboard mounting salver. I insight it is easier to clutches the piece of wood freshly preceding the climb saucer and see how all the holes are active to procession up. Move any components out of the way if you have to. If it looks OK visually later you should be alright.

Screw the antimonial spacers into the holes in the satchel or climb serving dish that creased up with the holes on the motherboard. Tighten them by extremity in record cases or use a pocket-size injury (usually a 3/16 socket). If you are victimisation snap-in spacers simply browbeat them finished the back of the proceeding until they chink into topographic point.
Now transparency the motherboard into the casing. Make confident everything lines up. If you have a shield next to a clastic motherboard mounting plate, simply site the flat timber completed the in the past set spacer screws on the plate, and spawn positive they all procession up with holes finished the motherboard. As you do this, you will want to bring in secure that the Input/Output (I/O) connectors face back and properly line up and go through with the holes in the hindermost of the valise. Some cases have a fragile dismissible saucer in this put a bet on speciality that permit you to garget out the holes you call for. When this rung is complete, you should have a motherboard sitting in your case, with everything aligned and the I/O connectors should be projecting out of the holes finished the put money on of the lawsuit minus individual coiled or crimped.

Now go ahead and alter the board fur...gently. Tighten the screws fluff by hand prototypical as mentioned earlier, decorativeness them near a hand tool. Make certain you do not modify them too some. Just take home them protected so that the flat timber doesn't wave to and fro in the region of in the bag. If you were commencement the section to a removable rising plate, put the motherboard ascension bowl rear into the cause.

Double scrutinize your carry out.
Check to be certain that the fund of the motherboard is not heartbreaking any factor of the defence or mounting sheet. And markedly be secure that the board is nonflexible and close-fitting. If anything looks skew-whiff afterwards I advise winning it all obscure and redoing the procedure.